Ronbow 200223 Bedienungsanleitung PDF herunterladen

Installation Sheet

www.ronbow.com

Step 1 :

Step 2 :

Ronbow Corporation, All Rights Reserved.

Ceramic Vessel

Model:

200223

Step 3 :

Step 4 :

Position countertop opening to ensure

clearance between the lavatory, faucet

and backsplash.

Position and drill a 6-11/16” hole in the

countertop

See Figure 1.

If using RONBOW drain, place a

generous portion of plumbers’ putty

(Not Provided) under drain cap and

insert whole drain body inside the

bowl and through the countertop

(There may be a small beveled rubber

washer packaged with your drain, please

discard this and use plumbers’ putty instead)

See Figure 3.

Apply a continuous bead of silicon

sealant (Not Provided) around the

edge of the countertop cutout.

Position the lavatory on the

countertop. Press down ﬁrmly on the

lavatory. Apply a thin bead of silicone

sealant (Not Provided) where the

lavatory meets the countertop

See Figure 2.

From under the drain, insert the thick

rubber washer and screw on and

tighten the metal nut. Remove exess

plumbers’ putty

See Figure 3.

Above Counter Sinks

Note :

Figure 1.

Figure 2.

Figure 3.

For Ceramic Sinks with overﬂow &

Faucet Deck

Step 5 :

Connect the trap to the drain. Run

water into the lavatory. Check all

connections for leaks

countertop

Apply sealant

Cutout

Drain

Drain Nut

Tailpiece

Thick rubber

washer

P-trap

Plumbers Putty

1

Ceramic Vessel 1

Inhaltsverzeichnis

Seite 1 - Ceramic Vessel

Installation Sheetwww.ronbow.comStep 1 :Step 2 : Ronbow Corporation, All Rights Reserved.Ceramic VesselModel: 200223Step 3 : Step 4 : Position counter

Kommentare zu diesen Handbüchern

Keine Kommentare